Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
24 of 51
Off (Power off)
● The following table shows how to make a command for power off remotely for a time period of the “minutes”
predefined.
Field
Marks
Value
Meaning
HDR
“ST910”
Model Name
COMMAND
“OFF”
Command Type
DEV_ID
6 or 9 char.
Digits ID of device
It is a part of IMEI.
Please check the “DEV_ID_TYPE”
setting.
OFF_TIME
String
minute
1 to 9999
.
It is a command which is needed to save battery power when the device is in a safe area and has no plan of
moving
for a time period of ‘OFF_TIME’.
When the device receives this command, it turns the power off and on after OFF_TIME minutespass.Duringthe
time period of
‘power off’, the device cannot send either any reports or alert. It cannot receive any
commandseither.This action is exactly same as power handling by pressing the key.
Instead of this command, you can turn off the power by pressing the key and turn on the power by pressing the
key after OFF_TIME minutes.
Caution
: Please eliminate the
‘data cable’ after you set ‘OFF COMMAND’ in ‘SyncTrak’ program.
<Example>
[command] ST910;OFF;123456789;480
[command] ST910;OFF;
456789
;480
[response] ST910;RES;OFF;123456789;480
[response] ST910;RES;OFF;
456789
;480
