Doc. Title
ST940 User Manual
Concerning:
Rev.
Date (dd-mm-yy)
Page of Pages
Features and how to configure ST940
1.19
0
19-06-15
15
11 of 51
5. CHARGING BATTERY
It is highly recommended that the rechargeable battery should be charged completely before using the
device.Connectthe ST940 to its charger cable supplied by Suntech and charge it for 7 hours.
< Charging Statusindicated on the battery LED >
Red blinkingtwice:under 10% of the full capacity
Red blinking:under 30% of the full capacity
Orange blinking:30% to80%
Green blinking:Almost charged
Green lighting:Completely charged
<Status of Charging Mode indicated on the battery LED>
As soon as the charger is connected with the device which has been turned off, the GPS LED will be turned on and
continue
<Charging Error>
When an error occurs while the battery is being chargedthe red LED and the green LED blink by turns.
In this case, please disconnect the charger cable and tryto do charging again by reconnecting the cable.
If this error occurs continuously, please replace the battery or contact Suntech.
<Caution!!>
The ST940 (device) should be charged by using the USB cable that Suntech provides the user with. In such a case,
however, Suntech does not guarantee that charging the device can be done completely. It is highly recommended that
the users, in charging the device, should use the battery charger provided by Suntech.