Sunsystem P 1500, Installation And Operation Manual

Page: 6 / 44

6
INSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUALINSTALLATION and OPERATION MANUAL INSTALLATION and OPERATION MANUAL
SPBM series -
Inlet/Outlet arrangement: 90 angle
degrees for easy and convenient
installation.
Possible installation in the corner of boiler
room.
Models SPBM - without coil
Models SPBM R - with one coil
Models SPBM R2 - with two coils
Product features:
- Optional removable insulation with
thickness 100mm and outer casing of
PVC, RAL 9006 color.
- Insulation type available for all models:
soft PU , fleece.
- Dividing plate (Separator). Distribution
plate (water stratification unit).
- Primer coated on the outside of the tank
- Up to 5 pcs. Rp½” sensor sleeves
Up to 13 pcs. Rp1” or Rp1½” inlet/outlet
sleeves -connections to heating boilers,
indirect heating of domestic hot water
(DHW) and solar system
Heat exchanger coil /coils (PBM R and
PBM R2)
-Optional kit for electric heating with
nominal power 3kW, 4.5kW, 6kW or
7.5kW
2.1. Insulation and outer casing
* PBM-H/ SPBM-H series – Rigid PPU
Capacity
Buffer tank, L
Insulation type
150, 200,
300, 500, 800, 1000, 1500,
2000, 2500, 3000, 5000
Rigid PPU 50mm
Soft PPU 100 mm
removable
The quality of the insulation of a
water heater is a key factor for its heat
conservation capability and energy
efficiency.
All Buffer tanks have a high efficiency
insulation (DIN 4753, part 8) and outer
casing with RAL 9006.
2.2. Connecting of safety relief valve
to buffer tank
1. Heating installation.
2. Tee.
3. Safety (relief) pressure valve.
4. Heat-carrier inlet.

Stop (Shut-off) valves should
never be installed between a
safety (relief) valve and the tank.
It is recommended once a year to
check the operation of the safety
valve.
2.3. Thermometer.
A microscopic view
of hard polyurethane