SunStar Multi Head User Manual Download Page 68

Page: 68 / 105

①

Press “Offset Position” button in the setting menu.

You will see the screen as the <Fig. 5.3.5-1>.

②

Press “Starting Position” button.

Design starting position will be enabled.

③

Set the X, Y values for the frame position using the arrow keys.

④

Press “Middle Position” button.

Offset middle position will be enabled.

⑤

Set the X, Y values for the frame position using the arrow keys.

⑥

Press “Offset Position” button.

Stop position after ﬁ nishing the design will be enabled.

⑦

Set the X, Y values for the frame position using the arrow keys.

⑧

Press “X” button on the top right to complete the offset position setting returning back to the
previous screen.

[Example 5.3.5-1]

Design starting position - X : 500, Y : 300

Offset middle position - X : 1000, Y : 1000

Stop position after ﬁ nishing the design(Offset)

- X : 1500, Y : 1700

Set as above.

Summary of Contents for Multi Head










































































































Search results

Summary of Contents for Multi Head

Reviews:

Brands by name

Popular brands

SunStar Multi Head, User Manual

Search results

Summary of Contents for Multi Head

Reviews:

Brands by name

Popular brands