manualshive.com logo in svg

SunStar Multi Head, User Manual

Share
Download
SunStar Multi Head User Manual Download Page 43

40

41

② 

After pressing “Edit” button, select “Edit >> Filtering.”

③ 

Check if there are any stitches below 0.3mm.

④ 

If there are stitches below 0.3mm, press 0.4mm button for the optimization stitch.

⑤ 

After selecting the room no. to be saved in using arrow keys, press save.

❸ 

Stitch Edit

Stitch edit is the function to change codes or stitch numbers for each stitch looking at the data from the 
called design. 
<Fig. 5.2.3.3-6> is the initial screen of stitch edit by pressing “Edit >> Stitch Edit.”

You can edit for each stitch number as in the <Fig. 5.2.3.3-6>.

Move by pressing the stitch data or code that you want to edit. 

Use the touch pad for setting value input, and “Add”, “Delete” buttons.

To move onto the next page, scroll down the screen.

It becomes possible to edit in condition that you selected X data or Y data. Use the number touch pad. To 
move to the next data, you can touch the data or input the stitch number that you want to move to on the 
top right of the screen and press “Go.”

There is a combo box for you to choose the function code on the right side of the screen. Press the arrow 
to change using “Normal ~ End Code.” There are 10 codes, and press “Apply” button on the right after 
selecting the function code that you want to set.

<Fig.5.2.3.3-6>

Summary of Contents for Multi Head










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands