manualshive.com logo in svg

Sunrise Medical QR-ED, Owner'S Manual, Page: 8 / 51

Share
Download
Sunrise Medical QR-ED Owner'S Manual Download Page 8

101519 Rev. A

8

Q R- E D

V.   U S E R   A C C E S S   L E V E LS

V. USER ACCESS LEVELS

There are 5 different user access levels in the Quickie Enhanced
Display. For this reason, the main menu may appear different from
user to user. User access-levels are as follows:

Level 1 (Fig. 1) allows users to access the Driver Menu and fault
codes.

Level 2 (Fig. 2) allows users to operate power seat options (power
tilt, power recline, power lift, etc.) as well as specialized control
systems (sip & puff, switch driving, proportional head control, etc.).

Level 3 (Fig. 3) includes level 2 access and adds the ability to moni-
tor critical chair functions and access manufacturing information on
each power module connected to the chair. All chairs ship from the
factory preset to level 3.

Level 4 (Fig. 4) includes level 3 access and adds the ability to 
program many basic chair functions.

Level 5 (Fig. 4) includes level 4 access and adds the ability to 
program more advanced chair functions.

This manual covers topics relevant to Level 1 first and progresses
on to higher levels of access. If the Main Menu does not appear,
there is a chance its access has been has been restricted by the
supplier. Please check with your supplier if this is the case or call
customer support @ 1-800-456-8166.

V I .   T I M E D   F U N C T I O N S

VI. TIMED FUNCTIONS

In cases where accessing a button or switch for the mode com-
mand is not desired, then time can be used to navigate between
driving and non-driving functions. This time limit is programmed by
the supplier and can range between 1 and 60 seconds. If no input is
given to the system within the programmed time limit, then it will
change screens from the Drive Display to the Driver Menu. Once
in the Driver Menu, the chair will not drive. To return to driving,
wait the programmed number of seconds or give the system a
quick left command.

Additionally, there are features that will put the chair to sleep. This
is helpful in cases where it is not convenient to turn power off, but
you do not want to accidentally drive.

This sleep mode is indicated by the screen shown at right,
“Suspend Activated”.  Usually a long mode command will send the
chair to sleep and wake it up again.

12
3 4

Main Menu

Driver Menu
Faults

1

12
3 4

Main Menu

Operate
Faults

2

12
3 4

Main Menu

Operate

Information

Monitor

Faults

3

12
3 4

Main Menu

Program

Monitor

Operate

Information
Faults

4

 SUSPEND
ACTIVATED

Summary of Contents for QR-ED




















































Reviews:

No comments