101519 Rev. A
18
Q R- E D
V I I .
F.
Each X10 IR controller “Powerhouse” is assigned an alphabetical (A-P) “house code”.
Usually, each room in a house has its own X10 controller set to a specific numerical house
code that operates the lights/appliances in that room. To operate, they must be within line-
of-sight of the Quickie Enhanced Display. Each Powerhouse controller can add up to 10
new associated modules. All 10 modules must use the same house code. Up to 16 “house
code” letters are available (one for each Powerhouse controller), which means up to 160
modules are available for any given house or building. For this reason, the same “Unit 1”,
“Unit 2”, “Unit 3”, etc. on the Quickie Enhanced Display screen may operate light/appli-
ances in more than one room. If more than 10 modules are required for a given house or
installation, additional controllers and modules must be added.
To operate an X10 device, toggle down and highlight “X-10” in the IR ECU Control list;
then toggle right. (NOTE: The X10 system must be properly set up before using. Refer to
page 17
for setup hints. Consult X10 instructions for full setup details.) A list of available
units is posted on the next page.
(See
page 16
to navigate to #1.)
Toggle right (#2) and then up to turn on the device (#3– next page). Follow screen
arrows for other commands. If the commands do not work, then press the mode button
to go back to the unit screen (#2) and try again. The problem may be that the unit select-
ed did not signal the X10 receiver that it is now in a new unit. Following each IR transmis-
sion, a red light will illuminate on the Powerhouse controller.
Controller “house code”
set to “A”.
Setting to a different letter
on another controller pro-
vides control of a different
set of Unit #’s 1-10.
These “unit codes”
correspond to the unit
numbers on the
Enhanced Display.
12
3 4
+
+
+
+
+
X10
IR ECU Control
Unit 1
Unit 3
Unit 2
Unit 4
Unit 5
Unit 6
X10 Powerhouse
IR Controller
X10 Module
Module set
to “A”
12
3 4
+
+
+
+
IR ECU Control
IR Menu
Mouse Screen
Telephone
X10
GEWA
Lights
Blinds
1
Toggle
down to
X10 then
toggle
right
12
3 4
+
+
+
+
+
X10
IR ECU Control
Unit 1
Unit 3
Unit 2
Unit 4
Unit 5
Unit 6
2
Toggle
Right