9:9
3
1
5
ST PS
Sunrise Training and Education Programmes
CHAPTER NINE
FRONT FRAME
Front Frame
Control Box & Looms
4
2
6
Cut the 2 cable ties on the steering head.
Cut the 3 cable ties on the frame.
*
*
*
*
*
Remove the tiller & floor panel as previously shown (Ch 7 & 9).
Feed the main loom into the hole at the front of the
frame.
Simultaneously pull from the rear of the frame until
the loom is through.
Use a small Phillips screwdriver to undo the 2
screws on the controller cover.
Carefully remove the cover taking care not to
damage the gasket.
