7:6
2
1
4
6
3
5
ST PS
Sunrise Training and Education Programmes
CHAPTER SEVEN
TILLER
Tiller
Connecting Bracket
The connecting bracket is secured by one long
bolt.
Turn the bracket against the steering stop then use
a 13.0mm socket & extension to undo the bolt ap-
proximately 3 - 4 turns. Do not undo completely.
Withdraw the bracket. When refitting ensure the
drive wheels are front & parallel to each other & the
tiller connecting bracket is facing straight ahead.
The bracket relies on the tightening of friction fit
-
tings & may require the seal breaking by turning
with a “tommy” bar as shown.
The Tiller Connecting Bracket.
Notice the small segment at the foot of the con-
necting bracket. The segment is part of the friction
fit. As the bolt tightens the segment moves in a
shear motion that wedges it inside the tube of the
steering head.
