2:1
CHAPTER
Tool Box
CHAPTER TWO
TOOL BOX
The following list of tools will enable any task
covered by this module to be carried out
quickly, effectively and safely.
The order in which tasks are executed can
vary depending on individual circumstances.
Be Aware!
It is the responsibility of the Servicing Engineer
to use their own judgement as to the suitability of a
particular work area for the task in hand.
If the safety of the engineer or others close by
is in question, we recommend that the vehicle is
removed to a more suitable safe area or workshop.
1.
Metric socket set.
2.
Hexagon wrenches (Allen Keys).
3.
3.5 - 8mm flat screwdriver.
4.
No. 0 cross-head screwdriver.
5.
No. 1 cross-head screwdriver.
6.
No. 2 cross-head screwdriver.
7.
Metric spanner set 5 - 25mm
8.
Mole grips.
9.
Long nose pliers.
10.
Adjustable spanner.
11.
Combination pliers.
12.
Circlip pliers.
13.
Soft hammer, (rubber, hide or nylon).
14.
Stanley knife.
15.
Pin punches.
16.
Torque wrench.
17.
Steel engineering rule.
18.
Tape measure.
19.
Tyre pump.
20.
Tyre pressure gauge.
21.
Personal safety gear.
22.
Wire strippers/cutters.
23.
Tag crimper.
24.
Multi-meter.
25.
Battery tester.
26.
PC programmer.
27.
Parts, Owners & Workshop Manuals.
Tool Box
ST PS
Sunrise Training and Education Programmes
