Sunix ESW-5162GP, User Manual

Page: 51 / 55

SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : info@sunix-ncci.com.tw
group
[Group Name ]
security-level
[NoAuthNoPriv|Auth
NoPriv|AuthPriv]
match-rule
[Exact|Prifix]
views
[Read View Name]
[Write View Name]
[Notify View Name]
snmpv3 mibview
view
[View Name]
type
[Excluded|Included]
sub-oid
[OID]
G Configure the mibview table of
SNMPV3 agent. switch(config)#snmpv3 mibview view V1 type
Excluded sub-oid 1.3.6.1
show snmp P Show SNMP configuration. switch#show snmp
no snmp
community-strings
[Community]
G Remove the specified community. switch(config)#no snmp community-strings
public
no snmp-server host
[Host-address]
G Remove the SNMP server host. switch(config)#no snmp-server 192.168.1.50
no snmp-server host
[Host-address]
G Remove the SNMP server host. switch(config)#no snmp-server 192.168.1.50
no snmpv3 user
[User Name]
G Remove specified user of SNMPv3
agent. switch(config)#no snmpv3 user Test
no snmpv3 access
context-name
[Context Name ]
group
[Group Name ]
security-level
[NoAuthNoPriv|Auth
NoPriv|AuthPriv]
match-rule
[Exact|Prifix]
views
[Read View Name]
[Write View Name]
[Notify View Name]
G Remove specified access table of
SNMPv3 agent. switch(config)#no snmpv3 access context-name
Test group G1 security-level AuthPr
iv match-rule Exact views V1 V1 V1
no snmpv3 mibview
view
[View Name]
type
[Excluded|Included]
sub-oid
[OID]
G Remove specified mibview table of
SNMPV3 agent. switch(config)#no snmpv3 mibview view V1 type
Excluded sub-oid 1.3.6.1
5.3.10 P
ORT
M
IRRORING
C
OMMANDS
S
E
T
Commands Level Description Example
monitor mode
[RX|TX|Both]
G Configure mode of monitor function. switch(config)#monitor mode both
monitor destination
[Port ID]
G Set destination port. switch(config)#monitor destination 2
monitor source
[Port ID]
G Set source port. switch(config)#monitor source 3
show monitor P Show port monitor information. switch#show monitor
show monitor I Show port monitor information. switch(config)#interface fastEthernet 2
switch(config-if)#show monitor
no monitor I Disable source port of monitor
function. switch(config)#interface fastEthernet 2
switch(config-if)#no monitor
5.3.11 802.1
X
C
OMMANDS
S
ET
Commands Level Description Example
8021x enable G Use the 802.1x global configuration
command to enable 802.1x
protocols. switch(config)# 8021x enable
8021x system
radiousip
[IP address]
G Use the 802.1x system radious IP
global configuration command to
change the radious server IP. switch(config)# 8021x system radiousip
192.168.1.1
8021x system G Use the 802.1x system server port switch(config)# 8021x system serverport 1815