SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
and delete filtering MAC address.
MAC Filtering interface
1.
MAC Address:
Enter the MAC address that you want to filter.
2.
VID:
Type in the VID of the MAC address.
3.
Click
Add
.
4.
If you want to delete the MAC address from filtering table, select the MAC address and click
Delete
.
All MAC Addresses
You can view the port that connected device’s MAC address and related devices’ MAC address.
1.
Select the port.
2.
The selected port of static MAC address information will display.
3.
Click
Clear MAC Table
to clear the current port static MAC address information on screen.
All MAC Address interface
4.1.32.3
Access Control List
Group Id:
Type in the Group ID from 1 to 229. (Maximum 255,26 rules for DHCP filter)
Action:
Permit and Deny.
Port:
Select specific port to apply the ACL,
VLAN:
Select any or a particular VID.
Packet type:
Select packet type – IPv4 or Non-IPv4
Src IP Address:
Select any or assign an IP address with Subnet Mask for source IP address.
Dst IP Address:
Select any or assign an IP address with Subnet Mask for destination IP address.
Ether Type:
Pull down the select menu for Any, ARP or IPX.
IP Fragment:
Set this item as to whether the fragment is checked or not.
L4 Protocol:
Assign the L4 protocol from among ICMP(1), IGMP(2), TCP or UDP.
