SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
Rate Limiting interface
All the ports support packet ingress and egress rate control. For example, assume port 1 is 10Mbps, users can set
the rate of effective egress to 2Mbps, and ingress rate to 1Mbps. The switch performs the ingress rate by packet
counter to meet the specified rate
¾
InRate:
Enter the port effective ingress rate(The default value is “0”)
¾
OutRate:
Enter the port effective egress rate(The default value is “0”)
And then, click
Apply
to apply the settings
4.1.27
VLAN
CONFIGURATION
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain, which allows you to isolate network
traffic, so only the members of the VLAN will receive traffic from the same members of VLAN. Basically, creating a VLAN
from a switch is logically equivalent of reconnecting a group of network devices to another Layer 2 switch. However, all
the network devices are still plugged into the same switch physically.
The industrial switch supports port-based and 802.1Q (tagged-based) VLAN. The default configuration of VLAN
operation mode is at “
Disable
”.
