SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
1.
IEEE 802.1x Protocol:
.enable or disable 802.1x protocol.
2.
Radius Server IP:
set the Radius Server IP address.
3.
Server Port:
set the UDP destination port for authentication requests to the specified Radius Server.
4.
Accounting Port:
set the UDP destination port for accounting requests to the specified Radius Server.
5.
Shared Key:
set an encryption key for using during authentication sessions with the specified radius server. This
key must match the encryption key which used on the Radius Server.
6.
NAS, Identifier:
set the identifier for the radius client.
7.
Click
Apply
.
802.1x System Configuration interface
802.1x Per Port Configuration
You can configure 802.1x authentication state for each port. The State provides Disable, Accept, Reject and Authorize.
Use “
Space
”
key change the state value.
Reject:
the specified port is required to be held in the unauthorized state.
Accept:
the specified port is required to be held in the Authorized state.
Authorized:
the specified port is set to the Authorized or Unauthorized state in accordance with the outcome of an
authentication exchange between the Supplicant and the authentication server.
Disable:
The specified port is required to be held in the Authorized state
Click
Apply
.
802.1x Per Port Setting interface
Misc Configuration
1.
Quiet Period:
set the period of time which the port does not try to acquire a supplicant.
