SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
4.1.4
M
AIN
I
NTERFACE
Main
interface
4.1.5
S
YSTEM
I
NFORMATION
Assigning the system name, location and view the system information
System Name:
Assign the name of switch. The maximum length is 64 bytes
System Description:
Display the description of switch. Read only cannot be modified
System Location:
Assign the switch physical location. The maximum length is 64 bytes
System Contact:
Enter the name of contact person or organization
Firmware Version:
Display the switch’s firmware version
Kernel Version:
Display the kernel software version
MAC Address:
Display
the unique hardware address assigned by manufacturer (default)
System information interface
4.1.6
IP
C
ONFIGURATION
To configure the IP Settings and DHCP client function
DHCP Client:
To enable or disable the DHCP client function. When DHCP client function is enabling, the industrial
switch will assign the IP address from the network DHCP server. The default IP address will be replaced by the
DHCP server assigned IP address. After user click “Apply” button, a popup dialog shows up. That is to inform
users that when the DHCP client is enabling, the current IP will lose and users should find the new IP on the DHCP
server.
IP Address:
Assign the IP address which the network is using. If DHCP client function is enabling, users do not
need to assign the IP address. The network DHCP server will assign the IP address for the industrial switch and
display in this column. The default IP is 192.168.1.1
Subnet Mask:
Assign the subnet mask of the IP address. If DHCP client function is enabling, users do not need to
assign the subnet mask
Gateway:
Assign the network gateway for the industrial switch. The default gateway is 192.168.16.254
DNS1:
Assign the primary DNS IP address
DNS2:
Assign the secondary DNS IP address
And then, click
Apply
