Sungrow SG2K5TL, User Manual

Page: 33 / 80

Installing Inverter onto Wall
5
23
5.3
Installation Procedure
Inverter is installed onto the wall by means of backplate in the packaging. If you don’t
use the supplied backplate, you can drill holes refer to its dimension below.
M1
0
Fig 5-1 Dimensions of Backplate and Fastener(unit: mm)
In the following pages, we will introduce how to install the inverter onto the wall using
the provided backplate.
Concrete Wall
1. Remove backplate and expansion bolts from the packaging.
2. Place the backplate onto the chosen concrete wall and adjust it until it is in a
horizontal position.
3. Mark the positions to drill holes using the backplate as the template.
4. Drill holes according to the marks you have made.