9 LCD Menu Operation
System Manual
50
LCD screen contains lots of parameters pertinent to the MV Station operation. All
parameter configurations must be done by appointed personnel. Do not modify
any parameters before you fully understand this manual or consult the staff from
Sungrow.
9.2.3
Backlight and Screensaver
If there is no operation to the screen for more than 5 minutes, the backlight will be off.
Activate the backlight by tapping the display and the display will return to the menu
operated previously.
9.3
Overview of LCD Menu and Icon
9.3.1
Overview of Submenu and Icon
There are three buttons on the lower left side of the touch panel for user to operate
“Start/Stop”
, “Home”,
, “Function”
. The logical structures of these
menus are shown below:
Main Menu
First sub-menu
Second sub-menu
Third sub-menu
Start/Stop
Start
-
-
Stop
-
-
Home
-
-
-
Function
Run-information
Real Time Data
-
Power curve
-
E-histogram
-
History-information
His-event
His-fault
-
His-data
-
His-alarm
Start/Stop
Start
-
Stop
-
Set-parameter
Sys-parameter
Language & Firmware
Ver.
Time
Load default
Run-parameter
-
Pro-parameter
-
Com-parameter
Serial-port param.
Ethernet param.
9.3.2
Layout of the submenus
The layout of submenus is the same as that shown below except for the default menu.
