Installation and Operation Manual
SA-07-11-87, Rev A
34
January 2019
Assembly (Extended Shaft Motor)
1.01 Place the seal housing on top of (2)
blocks/crates allowing approximately
12 inches of clearance underneath.
Attach the cartridge seal and it’s o-
ring to the seal housing (4) bolts.
Apply ½ the recommended torque to
the bolts.
1.02 Install the Cartridge Seal Housing to
the seal housing with (4) bolts. Align
to
match
marks
made
from
disassembly. Torque bolts to
specification.
1.03 Use the extended shaft motor’s
integrated lifting features to raise the
motor. Carefully lower the motor into
the cartridge seal.
