Installation and Operation Manual
SA-07-11-87, Rev A
29
January 2019
1.12 Loosen Set Screws on the Seal Collar
in an alternating pattern of one opposite
the other. Retract screws from shaft 2
to 3 turns to insure it is not in contact of
the shaft. It may be necessary to
slightly rotate the shaft to position the
screws for access around other bolts.
Loosen difficult to access screws first
before attempting to loosen the
remaining.
Note: Do NOT remove the seal
spacers while loosening or
gaining access to collar screws.
Spacers may be repositioned
but not removed.
For disassembly with an extended shaft motor see:
Disassembly (Extended Shaft Motor)
,
For disassembly with a bearing box see:
Disassembly (Bearing Box Configuration)
