Fascia Trim Installation
Step 87: Overhang first fascia
trim piece approximately 8”,
align with OSB sheeting using
a square, and fasten into 2”x4”
using galvanized trim nails.
Step 85: Cut 2”x4” fascia flush at edge.
Step 86: Layout 8’ primed fascia
trim pieces.
Step 88: Align remaining fascia trim boards with previously installed
boards and with OSB sheeting piece and fasten to 2”x4” as shown.
page 32
©
Suncast Corporation
Step 84: Repeat previous steps on back gable overhang and on opposite gable wall.
Toenail front and back together.
Summary of Contents for Keystone Garage
