Suncast Keystone Garage, Assembly Manual

Page: 26 / 50

page 25
©
Suncast Corporation
Step 58: Mark siding 8” from top of wall on both ends of gable wall
and snap a line as shown.
Step 60: Install first gable siding piece, keeping piece aligned at ends and with chalk lines as shown.
Note: Siding grooves should also align with grooves on lower wall.
Step 61: Install pre-cut gable
siding brace at siding splice as
shown.
Gable Siding Installation
Step 59: Starting with overlap at
front, layout gable siding pieces
as shown.
Note: There is a left and right
for end gable siding pieces.
Front piece for left gable wall
is 15” wide.
Step 62: Install remaining gable siding pieces repeating previous
steps. Repeat on opposite gable wall.
Note: If one gable wall has overhead door opening, see
instructions on pages 45-47.