![background image](http://html.mh-extra.com/html/sunbeam/snb652sia-series/snb652sia-series_service-manual_1393662040.webp)
Description of all Functions
ACTION
CHECKING
RESPONSE O.K.
RESPONSE NOT O.K. (CHECKING)
Lux
models
(with dis-
play)
Eco and Standard models
(LEDs)
Programs
End
Pre-wash
Intensive
Normal
Eco
Fast
Mixed
Task 10
( )
Distributor motor-
> Valve1. Intake
-> MN
1 Beep
1SA /
10 X
∘ ∘ ∘ ∙ ∘ ∘
1
SA /
1
10
X
∘ ∘ ∘
X
∘ ∘
Task 11
( )
BL + Vlve1 -> MN
1
SA /
1
11
∘ ∘
X
∘ ∙ ∘ ∘
Task 12
( )
BL => MPR
1
SA /
1
12
X
∘
X
∘ ∙ ∘ ∘
Task 13
( )
BL + Resist
=>NTC
1
SA /
1
13
∘ ∘ ∘
X
∙ ∘ ∘
Task 14
( )
BL + Resist =>
∆
Tª
1
SA /
1
14 X
∘ ∘
X
∙ ∘ ∘
Task 15
( )
BV -> MN Off
1
SA /
1
15
∘ ∘
X
X
∙ ∘ ∘
Task 16
( )
Vlve
Regeneration
+ DD/Tens +
Ventilator (1min)
1 : Digit 1 of the display lit (
fi
xed).
X : Flashing: 0.5 sec. ON and 0.5 sec. OFF.
∙
: Lit (ON state)
∘
: Dark (OFF state).
TASK 10. (TEST of the distributor motor (if it has one) plus Test of fi lling without
the wash pump active)
In this task,
fi
rst the distributor motor is activated, if it fails, this fault is displayed as
per the Table in Section 2.3.1; if it doesn’t fail, the water intake valve is then activated
(Valve1) until the level micro (MN) indicates full, generating a beep as con
fi
rmation. If
after 2 minutes the level micro (MN) does not indicate full, the corresponding fault is
displayed as per the Table in Section 2.3.1.
The control waits for the <ProgramS>key to be pressed before executing the follo-
wing task (Task 11).
TASK 11. (TEST of intake with the wash pump active)
The water intake valve (Valve1) is activated, and the wash pump (BL), until it is con-
fi
rmed that the level micro indicates full.
Distributor
motor
Valve 1
MN