![background image](http://html.mh-extra.com/html/sunbeam/snb652sia-series/snb652sia-series_service-manual_1393662011.webp)
Description of all Functions
and from there will follow the sequence of the new program.
The selected program may be changed as often as required, which will cause the pilot
LED for the previous program to go out and the new one to come on. In Lux models,
the wash time will be automatically readjusted when the next time adjustment step is
reached (according to the Program Table).
Also, in the Lux models, if the program has already begun, when the door is opened
to change the program, the display will show “PH”
fl
ashing, and if the Program key is
pressed, the display will show the program which was running, e.g. “P3”. If we conti-
nue to press the Program key, the new program will be shown on the display, until 2
seconds after the last time the Program key was pressed, when the display will show
“PH”,
fl
ashing.
Program cancellation
To annul a program so that the new one starts from the beginning, turn the dishwas-
her off using the main switch (<
ON/OFF
>).
Starting a wash with a time delay (Lux version)
Once the program has been selected, as described above in Program selection, the
start of the wash may be delayed by 19 hours.
Press the <
DELAY
> button, and the time display will show “1H” (1 hour). Press repea-
tedly to increase the time delay, from “
1H
”, “
2H
”,… up to “
19H
”. Pressing again annuls
the delay, and the display will then show the duration of the selected program. This
cycle may be repeated as many times as required.
Once the time delay has been selected, the time will count down from when the door
is closed.
The digits count the time down in hours, while the “
H
” is
fl
ashing.
While the display is showing the time delay, to see the program selected, press the
<
ProgramS
> key. The selected program will then be displayed for 3 seconds, after
which the remaining time delay will be shown on the display.
The selected program will start once the time delay is over, and the display will then
show the wash time.
Once the delay has been con
fi
rmed, the program and options chosen may not be
changed, and the delay cannot be annulled. If one of these changes were required, it
would be necessary to turn the machine off (resetting it), using the main (<
ON/OFF
>)
switch, and start programming the dishwasher from scratch.
Starting a wash with a time delay (Standard version)
Once the program has been selected, as described above in Program selection, the
start of the wash may be delayed by up to 9 hours.
Press the <
DELAY
> key, and the LED pilot for 3H delay will light up. Press repeatedly