Sunbeam is very safety conscious when designing and
manufacturing consumer products, but it is essential
that the product user also exercise care when using
an electrical appliance. Listed below are precautions
which are essential for the safe use of an electrical
appliance:
• Read carefully and save all the instructions provided
with an appliance.
• Always turn the power off at the power outlet before
you insert or remove a plug. Remove by grasping the
plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by a
qualified technician or service person.
• Always use your appliance from a power outlet of the
voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• The temperature of accessible surfaces may be high
when the appliance is operating.
• Never leave an appliance unattended while
in use.
• Do not use an appliance for any purpose other than
its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang over
the edge of a table or bench top or touch any hot
surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination, repair
or adjustment.
• For additional protection, Sunbeam recommend the
use of a residual current device (RCD) with a tripping
current not exceeding 30mA in the electrical circuit
supplying power to your appliances.
• Do not immerse the appliance in water or any other
liquid unless recommended.
• Appliances are not intended to be operated by
means of an external timer or separate remote
control system.
• This appliance is intended to be used in household
and similar applications such as: staff kitchen areas
in shops, offices and other working environments;
farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast
type environments.
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
FOOD PROCESSOR.
• Always use extreme care when handling processing
blades and cutting discs. These are extremely sharp
and may cause injury if handled incorrectly. Always
store processing blades and cutting discs in their
respective covers or processing containers.
• Unplug from power outlet before cleaning.
• Switch off the appliance and disconnect from
supply before changing accessories or approaching
parts that move in use.
• Always fit the safety cover before using the food
processor.
• Do not put hot liquids into the food processor
bowl or blender. Cool to room temperature before
blending or processing.
• Avoid contacting moving parts at all times.
• Place the processor bowl onto the base of the
processor before fitting any attachments.
• All blades and attachments should be removed with
care before cleaning.
• Do not over fill the processor.
• Always remove the blade before emptying the
processor bowl of its contents.
• When mixing a heavy load, ie. a ‘1.5kg dough’
do not operate food processor for more than 45
seconds at a time. This does not apply for any of
the recipes detailed in this booklet.
Sunbeam’s Safety Precautions
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
3
