background image

1

I

Introduction

Contents  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Getting started  . . . . . . . . . . . . . . . . . . . . . . . . .2
Connecting the DB-8   . . . . . . . . . . . . . . . . . . . .2
Quick Setup guide  . . . . . . . . . . . . . . . . . . . . . .2

Mainframe

Front & Rear panel   . . . . . . . . . . . . . . . . . . . . .3
Rack-mounting advise  . . . . . . . . . . . . . . . . . . .3
DSP Card & connection  . . . . . . . . . . . . . . . . . .4
AES-3 Coax Card . . . . . . . . . . . . . . . . . . . . . . .5

TC Icon Software Editor

The TC Icon Software Editor . . . . . . . . . . . . . . .6
Subnet Mask and TCP/IP  . . . . . . . . . . . . . . . . .7

Remote CPU

Front panel/Rear panel  . . . . . . . . . . . . . . . . . . .8
Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mouse, keyboard and monitor . . . . . . . . . . . . . .8

TC Icon

Front/Rear  . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Moving-faders  . . . . . . . . . . . . . . . . . . . . . . . . .9
Display  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Stand-plate mounting 
and mounting on mic-stand   . . . . . . . . . . . . . . .9

Additional I/O Cards

Installing additional I/O cards.  . . . . . . . . . . . . .10
ADA 24/96 setup parameters  . . . . . . . . . . . . .10
ADA 24/96 Bypass/Mute mode  . . . . . . . . . . . .11

Software, Network and Licenses

Updating DB-8 Software  . . . . . . . . . . . . . . . . .12
DB-8 in a Local Area Network . . . . . . . . . . . . .14
Setting Subnet Mask and TCP/IP  . . . . . . . . . .15
Illustration of a DB-8 in a Network . . . . . . . . . .16

TC Electronic, Sindalsvej 34, DK-8240 Risskov
[email protected]                       

HW & Installation DB-8
English version

HARDWARE & INSTALLATION - CONTENTS

Summary of Contents for DB8 MKII

















Reviews: