91
You will hear a beep when:
Program Setting Times and
Display Information
The LCD window will tell you if there is a
problem with your Quantum SmartBake.
Always use your Quantum SmartBake in
a room free of drafts. Do not use your
Quantum SmartBake outdoors, near a heat
vent or in direct sunlight.
DISPLAY READS
PROBLEM
SOLUTION
“
0:00” (:) flashing Select program setting
Use the Menu button to
select program.
“
E:01” flashing
The baking chamber is too
Open the lid and remove
hot to begin another cycle
bread pan to cool the chamber.
After the panel message disappears,
put the bread pan back into the
chamber and press START again.
“
E:02” flashing
Sensor malfunction
“
E:03” flashing
Sensor malfunction
“
E:04” flashing
CPU malfunction
“
E:05” flashing
Heater control malfunction
“
E:08” flashing
Heater control malfunction
The power is turned ON
Long beep
Select a setting from the Menu
Short beep
Invalid key-in
Long beep
Commencement of baking cycle
2 long beeps
Completion of bread baking process
Short and Long beeps
Contact Customer Service on
the toll free number
1800 025 059.
Note: After baking a loaf of bread, it is recommended to cool the breadmaker down to room
temperature as temperatures above ambient reduce the rising height of the bread due to the
sensitivity of yeast.
Summary of Contents for BM7800 Quantum SmartBake
