Sunbeam ART0000922835, User Manual

Page: 7 / 20

E12
For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)
E13
For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)
Action Command
Turn the bedding on Turn On, Activate, Power On
Turn the bedding off Turn Off, Deactivate, Power Off
Change the heat setting Change To Level…
Set the heat setting Set To Level…
Google Voice Enabled Devices
Personalizing the Product Name:
You can personalize the name of the of the heated bedding for easier voice commands.
1. Open the Sunbeam App
2. Click on the product you wish to change the name
3. Select the pencil icon in the top right corner
4. On the following screen, click on or tap the name of the product
5. Tap the current name of the blanket
6. Rename the product and press save
Note: The name will automatically be updated for both Amazon Alexa and Google Voice Enabled Devices.
Care & Cleaning
Care and Cleaning of Your Heated Bedding
Product
CAUTION: Do not dry clean. Do not use bleach. Do not use wringer. Do
not iron. Do not immerse control or cord in water or other liquids. Do
not use mothballs or sprays of any kind. Do not reconnect the heated
product until it is completely dry.
We recommend washing before initial use.
Before Washing or Storing Your Heated Bedding Product
1 Disconnect power cord from wall BEFORE detaching control cord from the heated product.
2 Ensure that no cords are still connected and none of the wires have worn through the fabric.
3 Carefully follow all washing instructions or your heated product may shrink and possibly cause a fire
hazard.
Washing Instructions
1 Machine wash in cold water, gentle cycle or hand wash.
CAUTION: Do not use commercial dryers or the dryers at your local laundromat. They get too hot and
would damage the wiring of the heated product.
2 Tumble dry low, delicate cycle or hang dry (instructions below).
3 Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Hang to Dry
1 While still damp, gently stretch the heated bedding back to its original size.
2 Drape the heated bedding over a clothesline or hang over a shower rod. DO NOT use clothespins.
3 Heated bedding must be COMPLETELY dry before reconnecting the power plug or control plug.
Controlling Your Bedding