Sunbeam ART0000922835 User Manual Download

Page: 4 / 20

For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)

Using the Wired Digital Controller

Controlling Your Bedding

The Wired digital controller can be used to power the unit, change the heat settings, and activate preheat.
These can be used in combination with the Sunbeam App and Voice assistants.
1.   To turn the product pad ON, press the “   ” button.
2.   To increase the heat setting, press the (+) button.
3.    To decrease the heat setting, press the (-) button.
4.   To turn the product OFF, press the “   ” button.

CAUTION:

ALWAYS turn the product “OFF” when not in use.

NOTE:

The bedding will automatically turn off after 10 hours of continuous use. You can change the auto-

off timer in the Sunbeam App.

Rapid Preheat Feature

The rapid preheat feature will heat the bed on high setting for 30 minutes and after will return to the last

heat setting.
1 To use the preheat feature, simply press the “ ” button. The display will show “P” while the function

is activated.

2. To turn off the preheat feature, press the “ ” again.

For Dual Controls:

On Queen and King Sized Bedding models, there is 2 zones allowing independent control of Side A & Side B. Side B is
indicated by the location of the label, near the bottom of the bedding.

- Left Side of the bed is Side A and the Right side of the Bed is Side B.
- Each side can be independently controlled using either the wired digital controller, the Sunbeam App, or

Voice Commands.

1. Power on/off
2. Increase/Decrease Heat

Settings. On Q/K models,

each side is controlled

independently. Left buttons are

for Side A, right buttons are for

Side B.

3.   Confirm Your Presence
4.   Rapid Preheat Feature
5.   On Q/K Models, Each Side is

Controlled Independently. Left

side of bedding is indicated

as side “A”. Right side of

bedding is Side “B”.

6. Heat Setting Indicator.
7. Wi-Fi Indicator

Sunbeam App Set Up

Connecting to Wi-Fi:

Pairing Your Device to the App:

Note:

The product must be connected to a 2.4 GHz Wi-Fi network.

Auto Pairing (Recommended Method)

1. Firmly connect the controller into the bedding and then plug it into a 120V AC outlet.
2. Download the Sunbeam App from Google Play or the Apple App Store. Use the QR code on the hang tag

connected to the heated bedding controller for easy access when downloading the Sunbeam App.

3.   Create an account by following the steps in the App.
4.   Enter the verification code you were sent to confirm your account, then create a password.
5.   Ensure that Bluetooth

is activated on your mobile device.

6.   Add your new Connected Bedding by selecting “Add Device” or “+” button in the upper right hand corner.
7.   Power on the controller.
8.   Press and hold the “

” button on the wired digital controller for 5 seconds, until the Wi-Fi indicator

on the wired controller begins to flash continuously.

9. Select “Go to add” on the pop-up screen that appears in the app, or select “Auto Scan” in the top middle

of the screen.

10.  When the device appears, press “Next”.
    a. Input in your Wi-Fi name and password.
  OR
    b. If a Wi-Fi name is already listed, and you want to switch to another Wi-Fi network, press the

“

” button on the right side of the current Wi-Fi name. Select your preferred Wi-Fi network in the

settings section of your mobile device.

IMPORTANT:

Network name and password are case sensitive. Please be sure to input your network name

and password, including spaces, dashes, capitalization, and special characters.

Controlling Your Bedding