Sunbeam ART0000922835, User Manual

Page: 3 / 20

E4
For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)
E5
For questions or support, please visit www.sunbeam.com (US) or www.sunbeam.ca (CA)
Table of Contents
Bed Set Up ..............................................................................................................E5
Controlling Your Bedding
Using The Digital Wired Controller .......................................................................E6
Sunbeam App Set Up ...........................................................................................E7
Using the Sunbeam App ......................................................................................E8
Sunbeam App Functionality .................................................................................E9
Additional In-App Features ...............................................................................E10
Voice Assistant Set Up & Functionality .............................................................E11
Personalizing the Product Name ........................................................................E12
Care & Cleaning ......................................................................................................E13
Frequently Asked Questions ...................................................................................E14
Limited Warranty .....................................................................................................E16
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
If you have any questions while setting up or using your product,
please visit us at: www.sunbeam.com or contact Sunbeam Consumer
Care in the U.S. at (800) 892-7684
or in Canada at (800) 667-8623.
CAUTION: Do not plug main power cord into the wall outlet until you have
completely set up your heated product per the instructions under “Bed Set Up”.
• Disconnect power cord from wall before detaching controller from heated
product.
• Always make sure cords and controllers are NOT trapped or pinched between bed slats,
mattress, springs, against wall, foot board or bed frame, or between furniture, walls or chairs.
CAUTION: Do not attempt to force the plug. This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electrical shock, this plug is intended to fit only one way into an
outlet. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
IMPORTANT
1. Place the heating bedding on the bed with the label at the foot of the bed facing upward.
2. On Q/K Bedding, there is 2 zones allowing independent control of Side A & Side B. Side B is indicated
by the location of the label.
3. Connect the cord into the module at the bottom of the heated blanket mattress pad until the plastic
hinges click into place.
CAUTION: Cord must be COMPLETELY CONNECTED. A risk of fire could result from a loose connection.
4. Run the controller cord on the floor under the bed. Do not sandwich cord between the mattress and
box spring. Avoid any tangling or pinching.
5. Plug power cord into a 110-120 volt wall outlet.
CAUTION: Do not use with generator power or inverter.
6. The controller can be placed on either side of the bed.
Heated Bedding Set Up
See Controller Features on Page 6
for your individual control.
If there is a flashing light or your wired controller
displays a flashing F1 or F2, see page 15.
STEP
1 Place on bed with
label at foot of bed
facing out
STEP
2
Connect the
Controller Cord
Connector and
module securely
STEP
3
Run Controller Cord
under the bed
STEP
4
STEP
5
Plug Power Cord
into wall
The controller
can be placed
on either side of
the bed
On Q/K Bedding, there is 2 zones
allowing independent control of
Side A & Side B
SIDE A
SIDE B
Bed Set Up