Contents
v
/CH/LOCATE Does Not Turn Off When Set to ON Using the ILOM CLI
21
SP Login Through Web GUI Fails After a New IP Address Is Assigned
22
SP Reports Incorrect FM, NEM, and Server Module Removal and
The Tempfail LED and Service LED On the Rear of the Chassis
Functionality Is Switched (6745875)
22
Blade Fan Control Improvement (6903302)
Error Message is Unclear (6863970)
24
or
start /CH/NEM
x Does Not Warn That Target Is Already
Started (6867739)
24
Cold Boot of CMM Causes Abnormal Chassis Fan Speed (6876374)
25
NEM OK LED Should Have Blinking State (6864854)
25
Issues Fixed in ILOM 3.0.6.11c
25
CMM Power/OK LED No Longer Works With ILOM 3.0.3.32 (6869525)
25
Low Fan Speed With Certain Blade Servers (6911651)
Issues Fixed in ILOM 3.0.6.11b
ILOM 3.0.3.32 Displays Incorrect Power Failures in Event Log With
Certain PSU Firmware (6865366)
26
Chassis Amber LED Turns on When PSU0 Is Plugged Into the Chassis
CMM Web Interface Slow Response (6853788)
PSU Fan Speed Should Run Slower (6853866)
27
Need to Include Assembly Number for the CMM (6866148)
27
LED Turns Off During Boot (6474460)
27
Summary of Contents for Sun Blade 6048
