Sun Oracle Crypto Accelerator 6000 Board, User Manual

Page: 104 / 266

82 Sun Crypto Accelerator 6000 Board User’s Guide for Version 1.1 • February 2013
2. Type
diagnostics
.
For example:
Direct Board Administration
You can also administer the board with a direct serial port connection. See “Direct
Input Devices” on page 7 for details on configuring this port and the suggested
serial input device. Most of the commands supported for connecting remotely with
scamgr
are also supported with the direct interface. The output of direct interface
commands is abbreviated to support the limited output capabilities of hand-held
devices. The following commands are not supported on the direct interface:
■ reset
■
zeroize
■
load firmware
There are also additional commands supported on the local interface that are not
available when connecting remotely with
scamgr
. These commands are primarily
intended to support financial services routines and USB backups. See Chapter 5 for
details of the financial services interface. The following commands are supported on
the local interface only:
■ cancel kek
■ cancel mfk
■
cancel uwk
■
delete dectable
■ delete kek
■
delete mfk
■
delete uwk
■ load dectable
■ load kek
■
load mfk
scamgr{mca
N
@
hostname
,
sec-officer
}> diagnostics
Performing diagnostic tests. This may take a few minutes...Done.
Diagnostic Results
----------------------------------------------------------------
General Hardware: PASS
Cryptographic Subsystem: PASS
USB Hardware: PASS
----------------------------------------------------------------