Sun Oracle Crypto Accelerator 6000 Board, User Manual

Page: 28 / 266

6 Sun Crypto Accelerator 6000 Board User’s Guide for Version 1.1 • February 2013
LED Displays
TABLE 1-2
describes the LED displays.
FIGURE 1-2
shows the location of the LEDs.
TABLE 1-2
Front Panel LEDs
Label Color Indication
STATUS Green/Red • Off when bootstrap firmware executes
• Green in POST, and DISABLED states (driver not attached)
• Flashing green in IDLE, OPERATIONAL, and FAILSAFE
states (heart beat)
• Red when board is in the HALTED (fatal error) state or
when a low-level hardware initialization failure occurs
• Flashing red if an error occurrs during the boot process
FIPS Green/Yellow • Off in non-FIPS mode
• Green when operating in FIPS mode
• Flashing yellow when zeroize jumper is present
INIT Green/Yellow • Off if the board has not been initialized
• Green if the card has been initialized by a security officer
• Yellow in POST, DIAGNOSTICS, and FAILSAFE (firmware
not upgraded) states
• Flashing yellow when running DIAGNOSTICS