Sun Oracle Crypto Accelerator 6000 Board, User Manual

Page: 43 / 266

Chapter 2 Installing the Sun Crypto Accelerator 6000 Board 21
Installing the Software on Oracle Solaris
Platforms Without the Installation Script
This section describes how to install the software manually without using the
installation script provided on the product CD.
Refer to the latest version of the Sun Crypto Accelerator 6000 Board Product Notes for
Version 1.1 (820-4145) for a list of the required patches. You must install all of the
required patches before installing the main software. The latest product notes are
available at:
http://docs.oracle.com/cd/E19321-01/820-4145-16/820-
4145-16.pdf
Note –
The
install
script automatically identifies your system architecture,
installs the required patches, and installs the main software appropriate for your
system.
In addition to the software provided on the product CD, required software is
provided at My Oracle Support (
http://support.oracle.com
).
▼
Install the Software Without the
install
Script
1. If installing from a CD, insert the Sun Crypto Accelerator 6000 CD into a CD-
ROM drive that is connected to your system.
■
If your system is running Sun Enterprise Volume Manager, the system should
automatically mount the CD-ROM to the /
cdrom/cdrom0
directory.
■
If your system is not running Sun Enterprise Volume Manager, mount the CD-
ROM as follows:
The required packages must be installed in a specific order and must be installed
before installing any optional packages. Once the required packages are installed,
you can install and remove the optional packages in any order.
2. If installing from a CD, install the required software packages by typing:
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom
# cd /cdrom/cdrom0/Sun_Crypto_Acc_6000/Packages
# pkgadd -d . SUNWmcafw SUNWmcact SUNWmcamn SUNWmcar SUNWmcau SUNWscafsm
SUNWscafsu SUNWscamga SUNWscamgm SUNWscamgr SUNWscamgu