Sun Oracle Crypto Accelerator 6000 Board, User Manual

Page: 69 / 266

Chapter 3 Administering the Sun Crypto Accelerator 6000 Board 47
▼
Log In To Another Board
●
Type the
connect
command.
For example:
In the previous example, notice that the
scamgr>
prompt no longer displays the
device instance number, hostname, or security officer name. To log into another
device, type the
connect
command with the following optional parameters.
scamgr
does not allow you to issue the
connect
command if you are already
connected to a Sun Crypto Accelerator 6000 board. You must first log out and then
issue the
connect
command.
Each new connection causes
scamgr
and the target Sun Crypto Accelerator 6000
firmware to renegotiate new session keys to protect the administrative data that is
sent.
scamgr{mca
N
@
hostname
,
sec-officer
}> logout
scamgr> connect host
hostname
dev mca2
Security Officer Login:
sec-officer
Security Officer Password:
scamgr{mca
2
@
hostname, sec-officer
}>
TABLE 3-3
connect
Command Optional Parameters for Connecting to Another Board
Parameter Meaning
dev mca
N Connects to the Sun Crypto Accelerator 6000 board with the driver
instance number of
N . For example
-d mca1
connects to the device
mca1
. The default is device
mca0
.
host
hostname Connects to the Sun Crypto Accelerator 6000 board on hostname. The
default is the loopback address. You may replace hostname with the
physical host’s IP address.
port
port Connects to the Sun Crypto Accelerator 6000 board on port port
(defaults to 6870).