Sun Oracle Crypto Accelerator 6000 Board, User Manual, Page: 95 / 266

Chapter 3 Administering the Sun Crypto Accelerator 6000 Board 73
2. Type
disable multiadmin
.
This command requires authentication by multiple security officers assigned the
Multi-Admin role.
For example, the following command disables Multi-Admin mode.
▼
Add Additional Security Officers to the Multi-Admin
Role
1. Start the
scamgr
utility.
2. Type
enable authmember sec-officer
N
.
where N is the number of the security officer.
For example, with the minimum number of required security officers set to three,
adding additional security officers requires the authorization of three different
security officers, including the initiating security officer, to authenticate before
this command can complete.
Execute the following command on the initiating security officer’s
scamgr
session.
scamgr{mca
N
@
hostname
,
sec-officer
}> disable multiadmin
scamgr{mca0@localhost, sec-officer1}> enable authmember
sec-officer4
NOTICE: Please wait while the other required 2 administrators
authenticate this command. This command will time out
in 3 minutes.
Update: Authenticated security officers: sec-officer1
Update: Authenticated security officers: sec-officer1 sec-officer3
Update: Authenticated security officers: sec-officer1 sec-officer3 sec-officer2
Added multi-admin role to Security Officer sec-officer4.