Sun Microsystems Ultra Enterprise 3000, Installation Manual

Page: 26 / 48

2-4 Ultra Enterprise 3000 System Installation Guide—May 1996
2
2.3 Connecting the Network Cable to the System
The locations specified in the following instructions assume the use of twisted-
pair 10BASE-T or 100BASE-T Ethernet.
1. Locate the network cable.
Figure 2-3 shows the twisted-pair Ethernet network cable.
Figure 2-3 Network Cable
2. Connect one end of the network cable into the RJ-45 twisted-pair network
port.
For 10/100BASE-T Ethernet, the default interface port is the onboard
connector on the I/O board in slot 1. See Figure 2-4.
Figure 2-4 10/100BASE-T Ethernet Connection
Ethernet port