Sun Microsystems Ultra Enterprise 3000, Installation Manual

Page: 23 / 48

2-1
Cabling the System
2
This chapter contains procedures for connecting the power cord to the AC
power supply and instructions for cabling the system.
2.1 Preparing the System for Cabling
Make sure the server is in an area that allows access to both the front and rear
of the chassis. This site should conform to site preparation guidelines and
specifications covered in Chapter 1.
2.2 Connecting the Power Cord
1. Use the handle on the front of the Enterprise 3000 system to pull the front
door open.
2. Locate the system key switch in the upper right corner, insert the key
provided with your system, and turn the key switch to (the Standby
position).
See Figure 2-1.