Sun Microsystems Ultra Enterprise 3000, Installation Manual

Page: 21 / 48

Preparing for Installation 1-7
1
Figure 1-4 Standalone Server Access Areas — Top View
1.7 Using the User Naming Area
To display the name of the server, IP address, owner, or other important
information on the front of the machine:
1. Remove the front bezel.
Refer to Chapter 12, “Preparing for Service,” in the Ultra Enterprise 3000
System Manual (Section 12.3.1, “Front Bezel”).
2. Snap out the narrow transparent window.
From the rear side of the bezel, gently squeeze the top and bottom edges
together as you simultaneously push the transparent window out through
the front of the bezel.
3. Choose the information that will appear on the label.
Common items include the name of the server, IP address, name and contact
information for the system administrator, and the group of users that the
machine services.
4. Use the colored paper provided with the system to make a label.
The available area for the paper label is 12 mm x 150 mm (0.5 in. x 5.9 in.).
Print or write the desired information in an area this size and cut the label to
fit the transparent window.
5. Place the paper label inside the window, and snap the window back in
place from the front side of the bezel.
Standalone
system
1.5 feet access at front
1.5 feet access at rear
6 inches
on each side