Sun Microsystems Sun Fire X4140, Service Manual

Page: 80 / 168

4-26 Sun Fire X4140 Server Service Manual • September 2010
12. Install the air baffle.
See Section 4.2.2, “Installing the Air Baffle” on page 4-12 .
13. Reinstall the PCIe cards and risers.
See Section 4.3.2, “Installing a PCIe Riser” on page 4-14 .
14. Return the server to operation.
a. Install the top cover.
See Section 6.1, “Installing the Top Cover” on page 6-2 .
b. Install the server into the rack.
See Section 6.2, “Reinstalling the Server in the Rack” on page 6-3 .
c. Reconnect the power cord (or cords) to the power supply (or supplies).
Verify that the AC Present LED is lit.
See Section 6.4, “Powering On the Server” on page 6-5 .
d. Power on the server.
See Section 6.4, “Powering On the Server” on page 6-5 .
15. After you replace the board FRU, use the
servicetool
command to update
FRU information about the board. See Section 4.7, “Servicetool FRU Update
Procedures” on page 4-27 .
4.7 Servicetool FRU Update Procedures
The following topics are covered:
■
Section 4.7.1, “Updating FRU Product Information Using ServiceTool” on
page 4-28
■
Section 4.7.2, “Restoring Product Information From the FRUID PROM” on
page 4-29
■
Section 4.7.3, “Changing Product Information on the Motherboard Using a File”
on page 4-30
Caution – The SunService account is for the use of Sun service representatives only.
Do not use the SunService account unless you are instructed to do so in a procedure
developed by Sun Microsystems.