32
Sun Fire V880z Server and Sun XVR-4000 Graphics Accelerator Installation and User’s Guide • May 2003
Sun XVR-4000 Graphics Accelerator
Cables
The following lists cables available for use with the Sun XVR-4000 graphics
accelerator.
■
13W3-to-HD15 cable adaptor, Sun part number 130-3034, for connecting
Sun XVR-4000 graphics accelerator to a monitor or projector which accepts
PC-style HD15 input (This cable is included in the Sun XVR-4000 graphics
accelerator installation kit.)
■
Framelock cable, Sun part number 530-2754 (see Chapter 7)
■
13W3-BNC cable, BNC-T connector, BNC-BNC cables, and a BNC 75-ohm
terminator for genlock cabling (see Chapter 8)
■
9-pin standard micro-DIN cable, used to extend the framelock cable
■
S-video cable, for connecting the Sun XVR-4000 graphics accelerator S-video
output (for example, VCR)
You can order these cables through the Sun store (
http://store.sun.com
).
Changing the Monitor Screen Resolution
The Sun XVR-4000 graphics accelerator device automatically configures itself to a
single video stream of 1280
×
1024 at 76Hz, using the maximum sample density
support (8) at that resolution. To change the screen resolution, use the
fbconfig
utility which is used for configuring all Sun graphics accelerators.
SUNWzulu_config(1M)
contains Sun XVR-4000 device-specific configuration
information.
●
To access the
SUNWzulu_config
man page, type:
# man SUNWzulu_config
