Sun Microsystems StorEdge D2, Installation, Operation And Service Manual, Page: 91 / 118

Chapter 4 Adding and Replacing FRUs 4-27
▼
To Reconfigure the Array on the Host
1. Log into the connected host as root, entering the root password when prompted.
2. Use the
devfsadm
command to add new device entries in the
/dev/dsk
directory
for the new disk drives.
3. Use the
format
command to check the disks, and to label and partition them if
required.
4. Run SunVTS
disktest
to ensure that all disk drives are operational.
5. Run SunVTS
enctest
to test the enclosure’s services and to ensure that the
enclosure’s power and temperature are optimal.
6. Use the
newfs
command to create file systems on the disks, as needed.
7. Mount new file systems using the
mount
command.