Sun Microsystems SPARCstation 4, Service Manual

Page: 46 / 190

3-6 SPARCstation 4/Xterminal 1 Service Manual • January 1995
2. At the other Sun workstation, add the following lines to the file
/etc/remote
:
3. In a Shell Tool window on the Sun workstation, type
tip hardwire
. (Some
commands will not work properly in a Command Tool window.)
The system will reply
connected
.
The Shell Tool window is now a
tip
window directed to the Sun workstation serial
port.
4. When you are finished running POST and want to disconnect the
tip
window,
either type
~.
(tilde period) in the
tip
window, or type
kill -9
and the process
ID number of the
tip
hardwire process.
3.5 Tests the POST Runs
Following is a sample listing of the Full Diagnostic Mode tests completed by the
POST.
hardwire:\
:dv=/dev/ttya:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
hostname% tip hardwire
connected
hostname% ~.
or
hostname% kill -9 PID# of tip hardwire process
TABLE 3-2
List of Full Diagnostic Mode Tests
MMU Context Table Reg Test
MMU Context Register Test
MMU TLB Replace Ctrl Reg Tst
MMU Sync Fault Stat Reg Test
MMU Sync Fault Addr Reg Test
MMU TLB RAM NTA Pattern Test