Sun Microsystems SPARCstation 4, Service Manual

Page: 126 / 190

11-8 SPARCstation 4/Xterminal 1 Service Manual • January 1995
FIGURE 11-8
Audio Module Connector Location
11.2.1 Removing the Audio Module
Do the tasks in the listed order:
■
Shut down and power off the system.
■
Remove the cover and attach a wrist strap.
■
Remove SBus card (if present).
■
Remove the Audio Module.
1. Shut down and power off the system.
See Section 6.1 “Powering Off the System.”
2. Remove the cover and attach a wrist strap.
See Chapter 7.
3. Remove the SBus card (if present).
See Section 11.1.1 “Removing the SBus Card.”
4. Free the audio cable from the cable slot on the side of the board, and from the
retaining hooks on the card guide.
See
FIGURE 11-8
.
5. Unplug the audio cable from the connector on the Audio Module.
Gently pull the audio cable from underneath the Audio Module metal shield, so that
the connector does not snag on any Audio Module components.
Audio Module
Rear Panel
connector