Sun Microsystems SPARCstation 4, Service Manual

Page: 11 / 190

Figures xi
FIGURE 9-21
Removing the Audio Cable From the Audio Module 9-22
FIGURE 9-22
Disconnecting the System Board Connectors 9-23
FIGURE 9-23
Pressing the Audio Cable Into the Cable Slot 9-24
FIGURE 9-24
Routing the Audio Cable Around the Corner Post 9-25
FIGURE 9-25
Securing the Audio Cable 9-26
FIGURE 9-26
CD-ROM Drive Rear Panel Connectors 9-26
FIGURE 9-27
Reconnecting the Main Logic Board Connectors 9-27
FIGURE 10-1
SPARCstation 4 System Board 10-2
FIGURE 10-2
SPARC Xterminal 1 System Board 10-3
FIGURE 11-1
SBus Slot Location 11-1
FIGURE 11-2
Opening the SBus Card Retainers 11-2
FIGURE 11-3
Removing the Extractor Handle From an SBus Card 11-3
FIGURE 11-4
Installing the SBus Card Extractor 11-4
FIGURE 11-5
Removing the SBus Card 11-4
FIGURE 11-6
Inserting the SBus Card 11-6
FIGURE 11-7
Securing the SBus Board 11-7
FIGURE 11-8
Audio Module Connector Location 11-8
FIGURE 11-9
Removing the Audio Cable From the Audio Module 11-9
FIGURE 11-10
Unlocking the Audio Module 11-10
FIGURE 11-11
Removing the Audio Module 11-11
FIGURE 11-12
Inserting the Audio Module Filler Panel 11-12
FIGURE 11-13
Removing the Audio Module Filler Panel 11-13
FIGURE 11-14
Inserting the Audio Module 11-14
FIGURE 11-15
Securing the Audio Module 11-14
FIGURE 11-16
Connecting the CD-ROM Audio Cable 11-15
FIGURE 11-17
Pressing the Audio Cable Into the Cable Slot 11-16
FIGURE 11-18
Routing the Audio Cable Around the Corner Post 11-17
FIGURE 11-19
DSIMM Slot Locations on the System Board 11-19