Sun Microsystems SPARC T5120 Service Manual Download Page 161

Page: 161 / 228

Servicing Boards and Components

145

Related Information

■

“Install the Fan Power Board” on page 145

▼

Install the Fan Power Board

1. Lower the board into its mushroom standoffs in the chassis floor and slide the

board to the right into the paddle card.

FIGURE:

Installing a Fan Power Board (Illustrates installation in a Sun SPARC Enterprise
T5120 server)

2. Secure the board to the chassis with a Phillips screw.

3. Install the fan modules.

See

“Install a Fan Module” on page 127

4. Install the top cover.

See

“Install the Top Cover” on page 175

5. If the server has been removed from the rack, return it to the rack as described

“Reinstall the Server in the Rack” on page 176

6. Slide the server into the rack.

See

“Return the Server to the Normal Rack Position” on page 177

7. Connect the power cords.

See

“Connect Power Cords to the Server” on page 178

8. Power on the system.

See

“Power On the Server Using the

poweron

Command” on page 179

“Power

On the Server Using the Front Panel Power Button” on page 180

Summary of Contents for SPARC T5120





































































































































































































































Search results

Summary of Contents for SPARC T5120

Reviews:

Related manuals for SPARC T5120

Brands by name

Popular brands

Sun Microsystems SPARC T5120, Service Manual

Search results

Summary of Contents for SPARC T5120

Reviews:

Related manuals for SPARC T5120

Brands by name

Popular brands