140
Sun SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
2. Unplug the power cords.
See
“Disconnect Power Cords From the Server” on page 62
.
3. Attach an antistatic wrist strap.
4. Remove the hard drive that is adjacent to the DVD/USB module.
The number of this HDD will vary, depending on the backplane type:
■
4-disk capable backplane: remove HDD3
See
“Four-Drive Capable Backplane Configuration Reference” on page 77
.
■
8-disk capable backplane: remove HDD7
See
“Eight-Drive Capable Backplane Configuration Reference” on page 78
.
■
16-disk capable backplane: remove HDD13
See
“Sixteen-Drive Capable Backplane Configuration Reference” on page 79
.
5. Release the DVD/USB module from the hard drive backplane.
Use the finger indentation in the hard drive bay below the DVD/USB module to
extend the release tab.
