Sun Microsystems Netra CP3060, User Manual

Page: 4 / 129

iv Netra CP3060 Board User’s Guide • April 2009
2.3.1 Checking Power, Thermal, Environmental, and Space
Requirements
2–3
2.3.2 Determining Local Network IP Addresses and Host Names 2–4
2.3.3 Installation Procedure Summary 2–4
2.4 Configuring the Blade Server Hardware 2–5
2.4.1 Installation of DDR-2 DIMM Memory Modules 2–5
2.4.1.1 Installing a DDR-2 DIMM Memory Module 2–7
2.4.1.2 Removing a DDR-2 DIMM Memory Module 2–8
2.4.2 Installation of Optional Compact Flash Card 2–9
2.4.3 Configuring Rear Transition Module Hardware 2–11
2.5 Installing the Sun Netra CP3060 Blade Server 2–11
2.5.1 Installing the Sun Netra CP3060 Blade Server With a Rear
Transition Module
2–11
2.5.1.1 Installing a Rear Transition Module 2–12
2.5.2 Installing the Sun Netra CP3060 Blade Server 2–15
2.6 Connecting External I/O Cables 2–17
2.7 Installation of Optional AMC Modules 2–18
2.7.0.1 Installing an Optional AMC Module 2–19
3. Software Installation 3–1
3.1 Operating Systems and Patches 3–1
3.2 Firmware Updates 3–2
3.3 Mandatory
/etc/system
File Entry 3–2
▼ To Check and Create the Mandatory
/etc/system
File Entry 2
3.4 Installing Diskless Clients 3–3
3.4.1 Creating a Boot Server for Diskless Clients 3–3
3.4.2 Adding a Diskless Client 3–5
3.5 Downloading and Installing SunVTS Software 3–7
4. Firmware and Blade Server Management 4–1