Sun Microsystems Netra CP3060, User Manual

Page: 67 / 129

4-10 Netra CP3060 Board User’s Guide • April 2009
fcode-debug? true, false false
If
true
, include name fields for plug-in
device FCodes.
scsi-initiator-id 0-15 7
SCSI ID of the Serial Attached SCSI
controller.
oem-logo? true, false false
If
true
, use custom OEM logo; otherwise,
use Sun logo.
oem-banner? true, false false
If
true
, use custom OEM banner.
ansi-terminal? true, false true
If
true
, enable ANSI terminal emulation.
screen-#columns 0-n 80
Sets number of columns on screen.
screen-#rows 0-n 34
Sets number of rows on screen.
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
Serial management port (baud rate, bits,
parity, stop, handshake). The serial
management port only works at the default
values.
output-device virtual-conso
le, screen
virtual-conso
le
Power-on output device.
input-device virtual-conso
le, keyboard
virtual-conso
le
Power-on input device.
auto-boot-on-error? true, false false
If
true
, boot automatically after system
error.
load-base 0-n 16384
Address.
auto-boot? true, false true
If
true
, boot automatically after power on
or reset.
network-boot-argument
s
[
protocol
, ]
[
key
=
value,
]
none
Arguments to be used by the PROM for
network booting. Defaults to an empty
string.
network-boot-arguments
can be
used to specify the boot protocol
(RARP/DHCP) to be used and a range of
system knowledge to be used in the process.
For further information, see the
eeprom
(
1M
) man page or your Solaris Reference
Manual.
boot-command
variable-name
boot
Action following a
boot
command.
boot-file
variable-name
none
File from which to boot if
diag-switch?
is
false.
boot-device
variable-name
disk net
Device(s) from which to boot if
diag-switch?
is
false.
TABLE 4-3
OpenBoot Configuration Variables (Continued)
Variable Possible Values Default Value Description