Sun Microsystems Netra CP3060, User Manual

Page: 54 / 129

Chapter 3 Software Installation 3-5
4. Download and install additional patches.
Refer to the Sun Netra CP3060 Blade Server Product Notes (819-4966) for the latest
information on the patches available for the Sun Netra CP3060 blade server. The
document can be downloaded from the following web site:
http://www.sun.com/documentation
Follow the instructions in the Sun Netra CP3060 Blade Server Product Notes
(819-4966) for downloading and applying patches to a diskless clients boot server.
5. After the patches are installed, follow the procedure in Section 3.4.2, “Adding a
Diskless Client” on page 3-5 .
3.4.2 Adding a Diskless Client
1. Prepare a patched boot server for the diskless clients.
Follow the steps in Section 3.4.1, “Creating a Boot Server for Diskless Clients” on
page 3-3 to create a boot server for the diskless clients.
2. Log in to the patched boot server as superuser.
3. Collect the following information for the diskless client you are adding:
■
Client’s IP address
■
Client’s Ethernet address
■
Client’s host name
4. Change directories to the
/usr/sadm/bin
directory.
5. Set up the diskless clients.
For each diskless client, type the following command as superuser:
Where:
■
ip_address is the client’s IP address
■
ethernet_address is the client’s Ethernet address
TABLE 4
# cd /usr/sadm/bin
TABLE 5
# ./smdiskless add -- -i
ip_address
-e
ethernet_address
-n
host_name \
-x os=sparc.sun4v.Solaris_
n
-x root=/export/root/
host_name
\
-x swap=/export/swap/
host_name
-x swapsize=
swap_size
-x tz=
time_zone
\
-x locale=
locale
-x ns=
name_service
-x nameserver=
name_server