Sun Microsystems Netra CP3060, User Manual

Page: 24 / 129

1-10 Netra CP3060 Board User’s Guide • April 2009
FIGURE 1-5
Relationship of the Sun Netra CP3060 Blade Server, Midplane, and RTM
Note –
When the RTM is used with the Sun Netra CP3060 blade server, shielded
cables are required for serial I/O ports. Unshielded cables can be used on Ethernet
ports to satisfy EMI compliance standards. The shields for all shielded cables must
be terminated on both ends.
The customer can order the Sun Netra CP3060 RTM, build a custom card, or buy
from an IHV. A minimal set of I/O must provide a boot path for the host board and
a path for console I/O to deliver commands and to read board and system status.
Netra CP3060 blade server
Netra CP3060 RTM
Zone 3
connectors
(installed from front)
(installed from rear)
ATCA chassis midplane